Supporter 1:   0383478272

Supporter 2:   0982412522

Supporter 3:   0986784306

Supporter 4:   0977284799

NOTES WHEN INSTALLING THE FIRE PUMP

Đăng bởi: CÔNG NGHIỆP ĐẠI NAM

As we all know, the fire pump is an important equipment in the fire protection system. Therefore, in order for the pump to be efficient when dealing with a fire incident, besides choosing a quality pump, the installation process must also strictly follow the manufacturer's instructions. Find out with Dai Nam!

What should be noted when installing the fire pump?

1. Surveying the scale and area where the fire pump system is installed

- To draw up the construction design drawings: each type of fire pump has different parameters through which the installation area is also different, ensuring to meet the design needs of the project. The pump room is large enough to ensure ventilation, the distance from the wall to the cooling impeller is at least 50cm.

- Determine the location of the pump: the pump is mounted on a hard base or inertial base depending on the requirements, but the pump should be installed on the inertial base, it is better for the pump as well as for the system. The weight of the inertial base is at least 1.5 times that of the pump. 

2. Caution when transporting fire pumps

When transporting the pump from one place to another, a load-bearing cable that can withstand a weight of at least 2 times that of the pump must be used. When lifting, the rope must be tied to the platform and must be lifted from the base without hook to the motor or pump to lift and lower. Note, during transportation, ensure the balance of the pump, avoid collision and damage to parts.

NOTES WHEN INSTALLING THE FIRE PUMP

Transporting the pump to the installation site is of utmost importance in the fire pump installation process

3. Note to install the fire pump in the fire protection system:

- To ensure the pump works stably to correct specifications during use, we should install the pump in a location close to the water source. The suction line is less winding and kinked, avoiding the creation of air pockets at the nozzle.

- Installed in the correct order and position including: suction cup, stop valve, filter medicine, flexible coupling, pump, soft coupling, one-way valve, stop valve. The distance from the suction basket to the bottom of the tank must be at least 30cm, from the suction basket to the wall of the tank at least 30cm to avoid absorbing garbage residue and forming whirlpools when entering the pump suction line.

- If the diesel fire fighting pump is installed in the outdoor direction, at the end of the waste pipe it is necessary to make a cover to prevent rain water from falling inside the machine through the pot pipe. Pay attention to the direction of airflow and the position of the operator on the machine. In case the exhaust pipe must be extended, the pipe must be large, if it is too small, it will not ensure the exhaust gas emission as well as heat dissipation, leading to the engine running for a while will stop.

- The size of the water pipe must be suitable for the diameter of the suction head, the pump of the pump, depending on the distance from the pump to the feed tank, choose a suitable suction pipe diameter but at least must be larger than the nozzle size of the pump. pump 1 level. The joints must be tight to avoid water leakage.

NOTES WHEN INSTALLING THE FIRE PUMP

Dai Nam staff inspects the fire pump before operation

Process is that, but to implement is a process, requires expertise and high technology. Therefore, in addition to choosing quality fire pumps with clear origin, customers also have to find reputable product assemblers and warranty providers. One of them is Dai Nam company - specializing in distributing genuine pumps imported from France with the brand name Masflo. In Dai Nam there is a full line of fire fighting water pumps, each model is divided into many categories with capacity, flow and pressure ... Therefore, Dai Nam company is a place that customers should not ignore. to own a standard and perfect fire fighting water pump system.

Coming to Dai Nam, you will be consulted, installed and guided how to maintain fire pump products suitable for each project.

For more information please contact:

DAI NAM SCIENCE INDUSTRIAL JOINT STOCK COMPANY

Address: Room 303- 3rd floor, AN BINH mixed building 1- Number 3 Tran Nguyen Dan street-Dinh Cong new urban area- Dinh Cong ward - Hoang Mai district - Hanoi.

Hotline : 0383 478 272                Tel : 024 364 00111     

Email: dainam@dainamco.vn    Website: congnghiepdainam.com.vn

Related posts

0383 478 272
zalo
NOTES WHEN INSTALLING THE FIRE PUMP